Acrylic Ring Displayers
Acrylic_Ring Fingers
Double Locking-Door Case
Folding Ring Circle
Four-Way Locking Case
Lighted Ring Display
Multi-Ring Display
Reversible Ring Blocks
Ring Clip Clamp
Ring Clip Displays
Ring Columns
Ring-Pad Displays
Revolving Shelf Security Case
Rotating Ring Tower
Rotating Ring
Tower Inside Locking Case
Stacked Ring Displays
For more Acrylic Displayers
click on any of these categories:
Acrylic Cleaners
Apparel Displayers
Cosmetic Displayers
Countertop Displays
Display Bases & Blocks
Easels
Egg & Sphere Displays
Eyewear Displays
Food and Bulk Dispensers
Jewelry Displays
Light Bases & Turntables
Literature & Card Holders
Mineral, Fossil & Seashell Displays
Ornament & Specialty Displays
Shoe Displayers
Showcases & Floor Fixtures
Slatwall Fixtures
Turntables
Show a single ring or up to six rings with our selection of solid acrylic tapered ring displays.
Specify acrylic finish: clear, black (b), or frosted (f).
RF1 1-Finger Acrylic on Square Base
RF1R 1-Finger Acrylic on Round Base (pictured)
RF6 6-Finger on Triangular Base
Acrylic Ring Fingers
RF5 5-Fingers on Rectangular Base
RF2 2-Finger on Rectangular Base
RF3 3-Fingers on Triangular Base
RF3R 3-Fingers on Round Base (pictured
RF4 4-Fingers on Rectangular Base
This locking ring cabinet is designed to hold 120 ring boxes. The cabinet has (5) v-shaped angled shelves with a 1" in lip. Unit is attached to a 12" lazy susan and has two locking doors.
LRC22 22 x 13-1/4 x 7 (HxWxD)
Double Locking-Door Case
Simple, elegant, and barely visible, this flexible display fits almost any size ring, showing it at a 45 degree angle. Sturdy enough to be used over and over.
FRH 1-3/8" Diameter.
Minimum order: 12
Folding Ring Circle
Wide shelves will accomodate two rows of eight ring boxes on each shelf, for a total capacity of up to 384 boxes.
Cam lock and two keys for four locks (all are keyed alike). Bent-lip doors add extra security. Turns on a lazy-Susan base.
LRC44 22-7/8 x 16 x 16 (HxWxD)
Four-Way Locking Case
For a truly unique ring display, use the accent of light! The translucent frosted display on top of our light box dramatically highlights rings.
The light box is electric and comes with a 6-foot cord with in-line switch and 7-watt bulb.
RFLB1 3-1/8 x 4 x 4 (HxWxD)
Lighted Ring Display
Create even more interest with loose gem stones scattered around the rings!
These six acrylic rods with five 1/4" gaps will display an array of rings. Polished, beveled side pieces add to the great look of this display.
Specify clear or frosted (f).
RGLM1 3-1/2 x 5 -1/2 x 3-3/4 (HxWxD)
Multi-Ring Display
Sized for single and multiple rings.
These solid acrylic blocks have a shallow groove on one side and a deeper groove on the other side in order to display different sizes of rings by reversing the block.
Specify clear or frosted (f).
SB1 1 x 1 x 1-1/2 (HxWxD)
SB2 1 x 5 x 1-1/2 (HxWxD)
Reversible Ring Blocks
Ring Clip Displays
A beautiful way to set off individual rings is with these solid acrylic columns. For a variety of looks, three different heights can be manufactured. All feature a nicely polished slot for the ring that is 1/2" deep, 7/8" wide and angled.
This is a NON-STOCK display
and is Made to order.
Minimum per size/finish is 30 pieces.
Specify clear or frosted (f).
RV1 1-1/2" H x 1-1/2" Diameter. Clear
RV1F Frosted
RV2 3" H x 1-1/2" Diameter. Clear
RV2F Frosted
RV3 4-1/2"H x 1-1/2" Diameter. Clear
RV3F Frosted
Ring Columns
Single upright or laid back models or a double rotating ring pad display
Double Rotating Ring Pad Display
CPDCT2 10-5/8 x 6 (HxDiameter)
Single Ring Pad Display
HxWxD
CPDCT 10-3/4 x 7 x 4-1/2 Upright position
CPDCT 4-1/2 x 7 x 10-3/4 Laid back position
Ring-Pad Displays
Rotating Tower with Changeable Inserts
Double high style will accommodate either 8 grey foam ring boards or acrylic inserts with J-Bars which can be used for jewelry cards or J-hooks.
Price does not include inserts. Click here for the information on the inserts.
CPD1 19-1/2"H x 7-1/2"W x 7-1/2"D
Customer's can turn the display by using the knurled base plate.
The inserts are not included.
Click here for the information on the inserts.
Locking Rotating Tower with Changeable Inserts
Locking Case and rotating ring tower with gray foam ring inserts allowing 288 rings per unit. This small footprint display allows you to place a large amount of inventory in a small space.
Note: only the 1-1/2" hooks can be used with the J-Bar inserts inside the locking case.
Your customer can turn the display by using the knurled base plate. Cam lock and two keys included.
Attractive acrylic mirror located on the corners,
helps to catch the customers' attention.
The inserts are not included.
Click here for the information on the inserts.
CPDCR1 20"H x 12"W x 12" D
Rotating Ring Tower Inside Locking Case
(Only the 1�" hooks can be used with the J-bar inserts when inside the locking case).
Price does not include inserts.The inserts are not included.
Click here for the information on the inserts.
Open and locking countertop styles for displaying rings in stacks. Ten solid acrylic pegs are 3" tall.
STKRG1 Open Stacked Ring Display
Ten (10) solid acrylic pegs are 3" tall x 1/2" diameter.
Overall size: 6" Hx 8-1/8" W x 8-1/4" D
STKRG2 Locking Stacked Ring Display
The display has (10) solid acrylic pegs for rings.
Pegs are 3" tall x 1/2" diameter.
The ring display slides into the locking case
which includes a cam lock and two keys.
The overall case size: 7-/12" H x 8-1/2" W x 9-1/4" D
STKRG1 Stacked ring display
Stacked Ring Displays
STKRG2
Locking Stacked Ring Display
Joined Heart Display
These two joined hearts are cut from 1/2" thick acrylic, with two ring clips attached to the top. They are ideal for wedding sets or engagement and wedding band combinations.
(HxWxD)Specify clear or frosted (F).
2HRT 3/4 x 4 -1/2 x 2 -1/2 clear
2HRTF 3/4 x 4 -1/2 x 2 -1/2 frosted
In sparkling clear or shiny black, these ring clips are made with a tough material that stands up to frequent use. (HxWxD)
GPT 3/8 x 5/8 x 1 clear
GPTB 3/8 x 5/8 x 1 black
Minimum order:12
Ring Clip
Ring clips attached to different heights of polished acrylic columns will add accent to ring displays.
(HxDiameter) Specify clear or frosted (F).
RH1 1-1/4 x 1-1/4 clear
RH1F 1-1/4 x 1-1/4 frosted
RH2 2-1/4 x 1-1/4 clear
RH2F 2-1/4 x 1-1/4 frosted
RH3 3-1/4 x 1-1/4 clear
RH3F 3-1/4 x 1-1/4 frosted
Ring Clip Attached to Columns
Ring clips attached to squares of 1/4" thick polished acrylic give extra stability for large rings.
H x Square"
RQ1 1/2 x 1-1/4 clear
RQ1B 1/2 x 1-1/4 black
RQ1F 1/2 x 1-1/4 frosted
RQ2 1/2 x 2 clear
RQ2B 1/2 x 2 black
RQ2F 1/2 x 2 frosted
Ring Clip Attached to Squares
Ring Clip Ramp
An ingenious way to display a number of rings, this ramp has six slots that hold the endpieces of ring clips in place. Depending on ring size, each of the slots will hold up to seven rings across.
Ring clips are sold separately. (HxWxD)
GPTR6 3-1/4 x 6 x 7-1/4 clear
GPTR6F 3-1/4 x 6 x 7-1/4 frosted
Ring Clip Ramp